Kapiaba, obrigado pela dica do FOR, mas não deu certo.
Alx, esta classe TBrowseSQL faz parte da contrib HBMYSQL do Harbour e olhando não encontrei o método, MAS o interessante é que se eu abro um PRG isolado e coloco o código e compilo sem estar integrado a minha App, FUNCIONA 100%, acabei por não entender o q esta ocorrendo.
Código: Selecionar todos
/*
* $Id: tsqlbrw.prg 14688 2010-06-04 13:32:23Z vszakats $
*/
/*
* Harbour Project source code:
* MySQL TBrowse
* A TBrowse on a MySQL Table / query
*
* Copyright 2000 Maurilio Longo <maurilio.longo@libero.it>
* www - http://harbour-project.org
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this software; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
* Boston, MA 02111-1307 USA (or visit the web site http://www.gnu.org/).
*
* As a special exception, the Harbour Project gives permission for
* additional uses of the text contained in its release of Harbour.
*
* The exception is that, if you link the Harbour libraries with other
* files to produce an executable, this does not by itself cause the
* resulting executable to be covered by the GNU General Public License.
* Your use of that executable is in no way restricted on account of
* linking the Harbour library code into it.
*
* This exception does not however invalidate any other reasons why
* the executable file might be covered by the GNU General Public License.
*
* This exception applies only to the code released by the Harbour
* Project under the name Harbour. If you copy code from other
* Harbour Project or Free Software Foundation releases into a copy of
* Harbour, as the General Public License permits, the exception does
* not apply to the code that you add in this way. To avoid misleading
* anyone as to the status of such modified files, you must delete
* this exception notice from them.
*
* If you write modifications of your own for Harbour, it is your choice
* whether to permit this exception to apply to your modifications.
* If you do not wish that, delete this exception notice.
*
*/
#include "hbclass.ch"
#include "common.ch"
#include "inkey.ch"
#include "dbstruct.ch"
#include "mysql.ch"
/* NOTE:
In fact no, the 'regular syntax is the same as the VO one,
ACCESS Block METHOD Block()
or
ACCESS Block INLINE ::MyVal
and
ASSIGN Block( x ) METHOD Block( x )
or
ASSIGN Block( x ) INLINE ::MyVal := x
*/
CREATE CLASS TBColumnSQL FROM TBColumn
VAR oBrw // pointer to Browser containing this column, needed to be able to
// retreive field values from Browse instance variable oCurRow
// VAR Picture // From clipper 5.3
VAR nFieldNum // This column maps field num from query
MESSAGE Block METHOD Block() // When evaluating code block to get data from source this method
// gets called. I need this since inside TBColumn Block I cannot
// reference Column or Browser instance variables
METHOD New( cHeading, bBlock, oBrw ) // Saves inside column a copy of container browser
ENDCLASS
METHOD New( cHeading, bBlock, oBrw ) CLASS TBColumnSQL
super:New( cHeading, bBlock )
::oBrw := oBrw
RETURN Self
METHOD Block() CLASS TBColumnSQL
LOCAL xValue := ::oBrw:oCurRow:FieldGet( ::nFieldNum )
LOCAL xType := ::oBrw:oCurRow:FieldType( ::nFieldNum )
DO CASE
CASE xType == "N"
xValue := "'" + Str( xValue, ::oBrw:oCurRow:FieldLen( ::nFieldNum ), ::oBrw:oCurRow:FieldDec( ::nFieldNum ) ) + "'"
CASE xType == "D"
xValue := "'" + DToC( xValue ) + "'"
CASE xType == "L"
xValue := iif( xValue, ".T.", ".F." )
CASE xType == "C"
// Chr(34) is a double quote
// That is: if there is a double quote inside text substitute it with a string
// which gets converted back to a double quote by macro operator. If not it would
// give an error because of unbalanced double quotes.
xValue := Chr( 34 ) + StrTran( xValue, Chr( 34 ), Chr( 34 ) + "+Chr(34)+" + Chr( 34 ) ) + Chr( 34 )
CASE xType == "M"
xValue := "' <MEMO> '"
OTHERWISE
xValue := "'" + xValue + "'"
ENDCASE
RETURN hb_macroBlock( xValue )
/*--------------------------------------------------------------------------------------------------*/
/*
This class is more or less like a TBrowseDB() object in that it receives an oQuery/oTable
object and gives back a browseable view of it
*/
CREATE CLASS TBrowseSQL FROM TBrowse
VAR oCurRow // Active row inside table / sql query
VAR oQuery // Query / table object which we are browsing
METHOD New( nTop, nLeft, nBottom, nRight, oServer, oQuery, cTable )
METHOD EditField() // Editing of hilighted field, after editing does an update of
// corresponding row inside table
METHOD BrowseTable( lCanEdit, aExitKeys ) // Handles standard moving inside table and if lCanEdit == .T.
// allows editing of field. It is the stock ApplyKey() moved inside a table
// if lCanEdit K_DEL deletes current row
// When a key is pressed which is present inside aExitKeys it leaves editing loop
METHOD KeyboardHook( nKey ) // Where do all unknown keys go?
ENDCLASS
METHOD New( nTop, nLeft, nBottom, nRight, oServer, oQuery, cTable ) CLASS TBrowseSQL
LOCAL i, oCol
HB_SYMBOL_UNUSED( oServer )
HB_SYMBOL_UNUSED( cTable )
super:New( nTop, nLeft, nBottom, nRight )
::oQuery := oQuery
// Let's get a row to build needed columns
::oCurRow := ::oQuery:GetRow( 1 )
// positioning blocks
::SkipBlock := {| n | ::oCurRow := Skipper( @n, ::oQuery ), n }
::GoBottomBlock := {|| ::oCurRow := ::oQuery:GetRow( ::oQuery:LastRec() ), 1 }
::GoTopBlock := {|| ::oCurRow := ::oQuery:GetRow( 1 ), 1 }
// Add a column for each field
FOR i := 1 TO ::oQuery:FCount()
// No bBlock now since New() would use it to find column length, but column is not ready yet at this point
oCol := TBColumnSQL():New( ::oCurRow:FieldName( i ),, Self )
IF !( ::oCurRow:FieldType( i ) == "M" )
oCol:Width := Max( ::oCurRow:FieldLen( i ), Len( oCol:Heading ) )
ELSE
oCol:Width := 10
ENDIF
// which field does this column display
oCol:nFieldNum := i
// Add a picture
DO CASE
CASE ::oCurRow:FieldType( i ) == "N"
oCol:picture := Replicate( "9", oCol:Width )
CASE ::oCurRow:FieldType( i ) $ "CM"
oCol:picture := Replicate( "!", oCol:Width )
ENDCASE
::AddColumn( oCol )
NEXT
RETURN Self
STATIC FUNCTION Skipper( nSkip, oQuery )
LOCAL i := 0
DO CASE
CASE nSkip == 0 .OR. oQuery:LastRec() == 0
oQuery:Skip( 0 )
CASE nSkip > 0
DO WHILE i < nSkip // Skip Foward
//DAVID: change in TMySQLquery:eof() definition if oQuery:eof()
IF oQuery:recno() == oQuery:lastrec()
EXIT
ENDIF
oQuery:Skip( 1 )
i++
ENDDO
CASE nSkip < 0
DO WHILE i > nSkip // Skip backward
//DAVID: change in TMySQLquery:bof() definition if oQuery:bof()
IF oQuery:recno() == 1
EXIT
ENDIF
oQuery:Skip( -1 )
i--
ENDDO
ENDCASE
nSkip := i
RETURN oQuery:GetRow( oQuery:RecNo() )
METHOD EditField() CLASS TBrowseSQL
LOCAL oCol
LOCAL aGetList
LOCAL nKey
LOCAL cMemoBuff, cMemo
// Get the current column object from the browse
oCol := ::getColumn( ::colPos )
// Editing of a memo field requires a MemoEdit() window
IF ::oCurRow:FieldType( oCol:nFieldNum ) == "M"
/* save, clear, and frame window for memoedit */
cMemoBuff := SaveScreen( 10, 10, 22, 69 )
hb_Scroll( 10, 10, 22, 69, 0 )
hb_DispBox( 10, 10, 22, 69 )
/* use fieldspec for title */
//@ 10, ( ( 76 - Len( ::oCurRow:FieldName( oCol:nFieldNum ) ) / 2 ) SAY " " + ( ::oCurRow:FieldName( oCol:nFieldNum ) ) + " "
/* edit the memo field */
cMemo := MemoEdit( ::oCurRow:FieldGet( oCol:nFieldNum ), 11, 11, 21, 68, .T. )
IF Lastkey() == K_CTRL_END
::oCurRow:FieldPut( oCol:nFieldNum, cMemo )
/* NOTE: To do in a better way */
IF !::oQuery:Update( ::oCurRow )
Alert( Left( ::oQuery:Error(), 60 ) )
ENDIF
ENDIF
RestScreen( 10, 10, 22, 69, cMemoBuff )
ELSE
// Create a corresponding GET
// NOTE: I need to use ::oCurRow:FieldPut(...) when changing values since message redirection doesn't work at present
// time for write access to instance variables but only for reading them
aGetList := { GetNew( Row(), Col(),;
{| xValue | iif( xValue == NIL, Eval( oCol:Block ), ::oCurRow:FieldPut( oCol:nFieldNum, xValue ) ) },;
oCol:heading,;
oCol:picture,;
::colorSpec ) }
// Set initial cursor shape
// SetCursor( iif( ReadInsert(), SC_INSERT, SC_NORMAL ) )
ReadModal( aGetList )
// SetCursor( SC_NONE )
/* NOTE: To do in a better way */
IF ! ::oQuery:Update( ::oCurRow )
Alert( Left( ::oQuery:Error(), 60 ) )
ENDIF
endif
IF !::oQuery:Refresh()
Alert( ::oQuery:Error() )
ENDIF
::RefreshAll()
// Check exit key from get
nKey := LastKey()
IF nKey == K_UP .OR. nKey == K_DOWN .OR. ;
nKey == K_PGUP .OR. nKey == K_PGDN
// Ugh
KEYBOARD( Chr( nKey ) )
ENDIF
RETURN Self
METHOD BrowseTable( lCanEdit, aExitKeys ) CLASS TBrowseSQL
LOCAL nKey
LOCAL lKeepGoing := .T.
IF ! ISNUMBER( nKey )
nKey := NIL
ENDIF
IF ! ISLOGICAL( lCanEdit )
lCanEdit := .F.
ENDIF
IF ! ISARRAY( aExitKeys )
aExitKeys := { K_ESC }
ENDIF
DO WHILE lKeepGoing
DO WHILE !::Stabilize() .AND. NextKey() == 0
ENDDO
nKey := Inkey( 0 )
IF AScan( aExitKeys, nKey ) > 0
lKeepGoing := .F.
LOOP
ENDIF
DO CASE
CASE nKey == K_DOWN
::down()
CASE nKey == K_PGDN
::pageDown()
CASE nKey == K_CTRL_PGDN
::goBottom()
CASE nKey == K_UP
::up()
CASE nKey == K_PGUP
::pageUp()
CASE nKey == K_CTRL_PGUP
::goTop()
CASE nKey == K_RIGHT
::right()
CASE nKey == K_LEFT
::left()
CASE nKey == K_HOME
::home()
CASE nKey == K_END
::end()
CASE nKey == K_CTRL_LEFT
::panLeft()
CASE nKey == K_CTRL_RIGHT
::panRight()
CASE nKey == K_CTRL_HOME
::panHome()
CASE nKey == K_CTRL_END
::panEnd()
CASE nKey == K_RETURN .AND. lCanEdit
::EditField()
#if 0
CASE nKey == K_DEL
IF lCanEdit
IF ! ::oQuery:Delete( ::oCurRow )
Alert( "not deleted " + ::oQuery:Error() )
ENDIF
IF !::oQuery:Refresh()
Alert( ::oQuery:Error() )
ENDIF
::inValidate()
::refreshAll():forceStable()
ENDIF
#endif
OTHERWISE
::KeyboardHook( nKey )
ENDCASE
ENDDO
RETURN Self
// Empty method to be subclassed
METHOD KeyboardHook( nKey ) CLASS TBrowseSQL
HB_SYMBOL_UNUSED( nKey )
RETURN Self
